Downloads (daddelkischde 2)

Here you can find STL files for 3D printing to download.

3D models (STL)

You can download the following 3D models in STL format to print them on your 3D printer.

There are two variants of 3D models that are screwed together: One variant is intended for direct screwing. The screws grip directly into the plastic. This is cheaper, but does not endure many screwings. The second variant is intended for threaded inserts. These inserts can be melted into the plastic with a soldering iron and have the advantage that the screw finds a suitable thread and can be screwed as often as desired. The models are designed for M2 threaded inserts with a height of 3 mm.

Assembly helper

The assembly helper will hold the three PCBs and the Raspberry Piin place to easily solder them together.

Assembly helper
Assembly helper

The assembly helper is used to solder the boards together.

Version 1.0

Download

Display cutout helper

The cutting helper makes it easier to cut out the display opening.

Display cutout helper
Display cutout helper

Makes it easier to cut out the display opening.

Version 1.0

Download

Shoulder button holder

This is the shoulder button holder that screws onto the shoulder button board. There is a variant for direct screwing and one for threaded inserts.

Shoulder button holder for screws
Shoulder button holder for screws

For direct screwing of the board.

Version 1.0

Download
Shoulder button holder for threaded inserts
Shoulder button holder for threaded inserts

For melting threaded inserts.

Version 1.0

Download

Display holder

The display holder is specially designed for the 3.5" DPI display and for the additional buttons on the front panel. The back case as well as the board are also screwed to the display holder. There are three variants:

One-piece display holder
One-piece display holder

One-piece display holder for direct screwing.

Version 1.0

Download
One-piece display holder, threaded inserts
One-piece display holder, threaded inserts

One-piece display holder with threaded inserts for back case and board.

Version 1.0

Download
Four-piece display holder, threaded inserts
Four-piece display holder, threaded inserts

Four-piece display holder with threaded inserts.

Version 1.0

Download

Dummy artridge with air outlet

This special dummy cartridge contains an air outlet, so that the built-in air can blow the waste heat out of the housing.

Dummy cartridge
Dummy cartridge

Dummy cartridge with air outlet.

Version 1.1

Download

Joystick drilling template

With this template, the hole for the joystick can be drilled at the appropriate location.

Joystick drilling template
Joystick drilling template

Template for drilling the hole for the joystick.

Version 1.0

Download

Micro USB cover

This cover is glued around the micro USB jack to prevent someone from looking inside the case.

Micro USB cover
Micro USB cover

Cover for the micro USB jack

Version 1.0

Download

DC barrel plug

This plug is used to close the unused DC barrel hole in the case.

DC barrel plug
DC barrel plug

Plug to close the DC barrel hole.

Version 1.0

Download

Battery spacer

When using a narrow battery, this spacer prevents the battery from moving around inside the battery compartment.

Battery spacer
Battery spacer

Spacer for the battery inside the battery compartment.

Version 1.0

Download

Button shim

The button shims can be put between the buttons and conductive pads to improve the pressure point. There are two heights available.

Button shim 0.7 mm
Button shim 0.7 mm

Shim for buttons to improve pressure point.

Version 1.0

Download
Button shim 1.5 mm
Button shim 1.5 mm

Shim for buttons to improve pressure point.

Version 1.0

Download

Mode button support

A support for the mode button so that the force when the button is pressed is transferred to the case.

Mode button support
Mode button support

Support for the mode button.

Version 1.0

Download

LED drilling template for cartridge

This drilling template helps you to drill parallel holes into the top of the cartridge for the LEDs.

LED drilling template for cartridge
LED drilling template for cartridge

Drilling template for parallel LED holes in the cartridge.

Version 1.0

Download

JST extractor

With this small tool you can pull out the battery connector without having to pull on the wires.

JST extractor
JST extractor

JST extractor for the battery.

Version 1.0

Download

Software

Here you can find software for the daddelkischde 2.

ZeroBOY OS 2

ZeroBOY OS 2 is a customized RetroPie image for the Raspberry Pi 2/3, which is already configured for the daddelkischde 2. You can find more details under configure.

ZeroBOY OS 2.2

ZeroBOY OS 2.2 for Raspberry Pi 2/3 and Zero 2 (based on RetroPie 4.7.19 Weekly from 2021-12-15)

Version 2.2.0

Download
ZeroBOY OS 2.1

ZeroBOY OS 2.1 for Raspberry Pi 2/3 (based on RetroPie 4.7.1)

Version 2.1.0

Download
ZeroBOY OS 2.0

ZeroBOY OS 2.0 for Raspberry Pi 2/3 (based on RetroPie 4.5.1)

Version 2.0.0

Download